Using Glaze to Tone Down Bright Colors

I've said before how I usually wait awhile for a piece of furniture to "speak to me" about how I should paint it.  And this one was no different.  What was different is that this little nightstand told me right away what to do!

 

The nightstand was white and plain except for the bamboo look legs and a bamboo look trim above the top of the top drawer and below the bottom drawer.  And the hardware, which wasn't looking too good,  was also made to look like bamboo.

 

The bamboo was telling me tropical but I didn't want to paint it palm tree colors of brown and green.  But I did want to make it beachy looking (that's what it had told me it wanted to be!). Soooo, I painted on a couple of coats of CeCe Caldwell's Paint in Seattle Mist.  I love this color! 

 

But the twist to make it look beachy was to paint the drawers Maine Harbor Blue.

 

The blue was a little too bright for the look I had in mind so I coated the drawer fronts with CeCe Caldwell's Satin Finish.  When that had dried, I brushed on a coat of a glaze made from CeCe Caldwell's Clear Glaze with a little Seattle Mist paint added to it (sorry I didn't take a pic).  That toned the blue down to just the right shade. After the Glaze had dried, I applied another coat of Satin Finish.  I also painted the hardware with CeCe Caldwell's Simply White and when it had dried, I applied Clear wax then buffed when dry. 

 

 

After applying CeCe Caldwell's Clear Wax to the nightstand and over the dry Satin Finish on the drawer fronts, I buffed when dry.   The nightstand was then ready for my booth at Old South Antique Mall.  After I added a few nautical accessories, it sold to a lady looking for a nightstand for her lighthouse themed guest room.

 

Another cute little transformation complete and off to its new home.

My Battle with Veneer

 

I recently told you here what to do when you face the problem of bleed-through when painting your furniture.  This week, we're going to tackle another problem.  I frequently come across some great old furniture pieces with good character and bones but the veneer is often broken, loose, buckling, etc.  Like this beautiful little vintage table I found.  It has great legs and carved details and everything about it was in absolutely perfect shape - except the veneer on the top. 

 

 

 

I first hoped I could just glue the veneer back down where it was lifting up.  But it was put on in a pattern and those small pieces were already trying to buckle up.  I knew if I painted over it the veneer would eventually finishing buckling and the pieces would come loose. 

 

So, I decided the veneer had to be removed.  That's when the new trouble began! The veneer on one end of the table was so dry and brittle that it pulled right off.  As usual, there were two veneer layers - the thin top layer and a thicker layer on top of the solid wood table top.   The veneer on the other half was stubborn!  I almost forgot to take a photo of it, but here it is when I was almost finished.  Not a pretty sight!  If you look closely you can see the two veneer layers.

 

 

 

The veneer on the second half of the table was really hard to remove.  I'll admit that I had to just leave it alone for awhile while I figured out what to do (and get up enough nerve to tackle it)! I first tried out my new heat gun.  I was careful to get close enough to hopefully loosen the glue but not so close to damage or burn the wood.  Fail! This may work on some pieces but not too well on this one.

 

 I had read that the glue on older veneers is water based so I tried a couple of other methods. First, I got out the iron I had bought at a thrift store just for removing veneer.  Note:  DO NOT use your household iron.  It will be ruined immediately by the glue.  I wet an old washcloth and placed it on the veneer then pressed the hot iron down on it for a few seconds.  Some people use a metal paint scraper, but I had luck with a flexible, thin blade filet knife.  BE CAREFUL!  The veneer came off in mostly small pieces but at least it was coming off smoothly when it did.  This method worked for awhile until I hit some real stubborn areas.  The two layers of veneer would not budge!  So, I then sanded with my palm sander to open up the finish some to allow the moisture to penetrate through the veneer down to the glue.  Next, I took a spray bottle of water and wet the veneer down well.  After waiting a few seconds, I placed the washcloth on top and again applied heat with the iron before using the knife to remove the veneer. 

 

 

Again, the pieces of veneer didn't come off in large pieces but with time and a little patience, I managed to get all of the veneer off.  Lots of areas were left with small amounts of glue so I used my electric palm sander to remove them and get the surface as smooth as possible.  See those dark areas in the wood?  Especially since I knew I was going to paint the table white, they concerned me.  And so did any remnants of glue residue I may have missed.

 

 

So what did I do?  Just like I did with the table with stain bleed-through, I sprayed the surface with my trusty Zinsser Bulls Eye Spray Shellac to seal it all in.  When that dried, I applied a coat of CeCe Caldwell's Paint in Virginia Chestnut.  Since I was going to distress the table, I wanted the surface to be fairly close to the original finish.

 

After the Virginia Chestnut had dried, I applied another coat of spray shellac.  Why?  When I distressed the white paint, I didn't want the distressing to go all the way down to the original lighter colored wood.  By spraying the shellac over  the Virginia Chestnut, the distressing left the Virginia Chestnut as the original wood color and did not remove it.

 

I then painted on two coats of CeCe Caldwell's Vintage White, allowing to dry between coats.  After the second coat had dried, I distressed with a damp washcloth. On surfaces that are likely to receive a lot of wear and tear and maybe even drinks, etc. being placed on them, I like to use CeCe Caldwell's Satin Finish. I applied a coat of Satin Finish diluted with water, allowed it to dry before lightly sanding with fine grit sandpaper and repeated with another coat of diluted Satin Finish before again lightly sanding.  Next I used the brown paper bag method.  Believe it or not, you can take a regular brown paper bag (I used a lunch bag) and "sand" the surface.  You will not believe how smooth the surface becomes!  I like a waxed finish so I applied a coat of clear wax over the Satin Finish on the tabletop and after it had dried finished by buffing it to a sheen. 

And another beautiful old, vintage table is saved from the discard pile with a little determination and patience and some basic household items! Do I like removing veneer?  Of course not!  Will I do it again?  Absolutely!  Because there are so many old, beautiful pieces out there with damaged veneer.  Just look past the damage to what it can become.

Dealing With a Troublemaker

Painting with CeCe Caldwell's Natural Chalk & Clay Paint is so very easy.  No stripping, no sanding (unless the finish is peeling, chipping, etc.) and the furniture needs only a good cleaning with a degreaser.  But even with this wonderful paint, sometimes things don't always go exactly as planned.  I found this vintage coffee table that I love for its simple yet classy lines and legs and cleaned it with a degreaser like I do every other piece I paint.  It had some dark spots on one end where it looked like something had been spilled, so I sanded over those to remove any remaining residue,

Since I already had the sandpaper in my hand, I lightly sanded over the entire tabletop for good measure.  I decided on Virginia Chestnut for my base coat and that night I painted on a coat. 

 

 

A painting tip:  Always turn tables and chairs upside down when possible.  If you don't, you will think you have everything covered but you won't.  Trust me on this! When you get the legs and underside of the tabletop painted, just flip it over and paint the top and any spots you may have missed when it was turned upside down.

 

I had several projects going at the same time so I forgot to get a photo of the table right after being painted with the basecoat of Virginia Chestnut.  But everything was good so far.  On my way out of the garage the next morning I noticed the tabletop still looked wet in some spots which was strange because the paint dries so quickly.  It had been raining the night before and I was in a hurry so I really didn't think too much about it other than I was going to put on the topcoat when I got back home. 

When I got ready to paint the topcoat, I was tempted to go ahead and paint on the topcoat of Seattle Mist but there were still splotchy areas and I knew it wasn't wet paint.  If you look closely you can see a few of the wet looking spots. I was so distressed that I forgot to take a pic of the entire table. 

 

 

 But I did do what I knew I was supposed to do! It's what should always be done when you first see splotches coming through the basecoat.  I started by sanding off the paint - but only in the areas where the bleed through was happening.  Real quick and easy to do.  The paint that came off in those areas was gummy but was so easy to sand off.  And this is the very ugly mess I was left with. 

 

 

It was time to bring out the magic "secret weapon". 

 

 

Zinsser Bulls Eye spray shellac is a lifesaver.  I lightly sprayed over the entire top and waited for it to dry.  It dries so quickly!  The shellac seals in all the ugly unknown things trying to bleed through your paint.

 

 

 I recoated the top with another coat of Virginia Chestnut before applying a topcoat of Seattle Mist.  After the Seattle Mist was dry, I wet distressed with an old wash cloth.

 

I then finished the legs and area under the tabletop with CeCe Caldwell's Clear Wax.  When it was dry, I buffed it to a beautiful shine.  Since tabletops get more rough treatment, using a sponge applicator brush, I applied a coat of CeCe Caldwell's Satin Finish diluted 50/50 with water.  When that had dried, I lightly sanded with 500 grit sandpaper and applied another coat of diluted Satin Finish.  When the second coat had dried I again lightly sanded with 500 grit sandpaper to remove brush strokes and give a really smooth surface.  I finished by applying a coat of Clear Wax over the Satin Finish, letting it dry and then buffing.  (You can apply Clear Wax over Satin Finish but not vice versa).

 

And here she is!  My little troublemaker table turned into a real beauty.

  

 

And the moral of this story is:  You never know what a table may have gone through before you paint it.  At the very first sign of a stain bleed through - STOP!  Don't think you can paint over it and it will be covered.  No matter how many coats you apply, the stain will bleed through.  Go head and deal with it at the first sign of a problem by blocking the stain with spray shellac.  If you paint enough furniture, you'll eventually be faced with this problem one day.  And now you know how to handle it!

Painting Metal Lamps with CeCe Caldwell Paints

Some of my favorite things to revive and restore with paint  are lamps.  So I was excited when I found this large, very heavy metal lamp base at an area thrift store.

It sat around in my garage for awhile as I waited for it to "speak to me" about how it should be painted.  Finally, I heard it loud and clear and painted on a base coat of CeCe Caldwell's Paint in Myrtle Beach Sand.  No prep, no sanding and no primer.  Yes, you can paint metal with CeCe Caldwell's Paints without using a metal primer!  Just start painting on the bare metal.  How easy is that?

 

 

 It looked so good that I considered just leaving it Myrtle Beach Sand.  But I proceeded with my plan. When the basecoat dried, I followed with a coat of CeCe Caldwell's Paint in Montana Blue Sky.  I'm not normally a blue paint lover but the lamp had "spoken" to me.  It turned out I really love this beautiful color!

 

 



When the Blue Montana Sky had dried completely, I wet distressed with a damp cloth to expose the Myrtle Beach Sand and the original brown metal.  Wet distressing is really easy on metal as the paint comes off very easily.  It's easy to overdo it, so don't distress as much as you feel like you should.  Using a small wax brush to get into all the little spaces, I applied a coat of CeCe Caldwell's Clear Wax to seal the paint and wiped off the excess.  See how the wax turns the paint darker so you can make sure you haven't missed a spot?   

 

 

This lamp didn't need Dark Aging Cream added because the metal was already dark and was showing through after distressing. After waiting a few hours to make sure the Clear Wax was completely dry (you can tell it's dry when it no longer feels tacky), I took a soft cloth and buffed to a soft shine.  



 

  

I found a beautiful, brand new pleated fabric shade a few months earlier at another thrift store.  When I find a bargain on something this beautiful I always buy it knowing I'll have a use for it one day.  And I'm so glad I did!

 

 

I absolutely love how this lamp turned out and am already on the hunt for another one to update with CeCe Caldwell's Paints.

 

 Linked to:



Painted Books



As a CeCe Caldwell's Paints retailer, I had the idea to demonstrate how almost anything can be painted with our paints.  So, when I stumbled across these old books from the 1940s and 1950s I knew what I wanted to do.    The books were only $.50 each and while I hesitated at first to paint the books, I knew I wouldn't be destroying them but perhaps actually keeping them from being destroyed.

 

 

 

The covers of these books were a type of fabric so I was anxious to see how they would turn out.  I placed a screwdriver under each end of one of the covers to hold it up off of the pages underneath while painting.  With a sponge brush I painted one cover and the spine with a coat of CeCe Caldwell's Vermont Slate.  When it dried, I turned it over and painted the back cover.  I did this for each of the three books. 

 

 

When the books dried completely, I played around a little with how I wanted to arrange the books.  Having a smaller one to put on the top would help make a more interesting display.  I stenciled the chosen designs on the books using CeCe Caldwell's Vintage White, keeping the arrangement of the books in mind so the stencil designs would show.  When the stenciled designs dried, I very lightly sanded them to give a more vintage appearance.

 

After binding them together with a little twine and adding an old skeleton key, the books were ready to be placed in my space at Old South Antique Mall.

 

I love how they turned out and can't wait to make some more - and hopefully make  a set for me to keep as well!

Linked to:

Whewwwwww!

It has been like a whirlwind here lately!  CeCe Caldwell's Paints came in (yay!) and other new items for my space at Old South continue to come in.  My granddaughter's first birthday party is coming up next weekend and her mother and I are now in full, all-out planning and creating mode.  My grandmother is very ill and I'm trying to make the hour drive as many days as I can.  I have several cases ongoing in my "other" job as a private investigator.  And I try to squeeze a little time in to search for vintage treasures and furniture that need a little TLC and CeCe paint. So, you don't want to even ask what my house looks like these days!

But, I had to share this with you.  Hurry because you only have a little more than 18 hours to enter.  Go here to enter to win CeCe Caldwell's Paints.  Grand prize is 3 quarts of paint and a pint of clear wax.  First prize is a quart of paint and a pint of wax.  Contest ends at 12 noon EST tomorrow (Saturday). 

And in the middle of all the chaos, I just learned that I will be having a very special paint-related visitor in a couple of weeks.  I am so excited and will be sharing it with you very soon.  But in the meantime, go like Cece's Facebook page and enter to win some paint!

My K.I.S.S. Valentines Mantel

I always try to do a little seasonal/holiday decorating on my mantel by changing out a few pieces.  However, traditional red and white Valentines Day decor doesn't fit into my decorating scheme.  By adding a couple of items, this is what I came up with:

 

 

The wood rose wreath hanging on the mirror was pulled in from my kitchen where it hangs year round.  You may recognize a few items from my fall and Christmas mantels as they are my regular mantel pieces.  I needed to add a couple of items to make it seem more like Valentines Day so I added the porcelain cherub and the framed cherub print.  I picked them both up for a total of $3.00 at a thrift store.  I had found several cherub plaques but this cherub figurine was perfect because it would sit on the edge of my mantel.

 



The framed cherub print is one we see everywhere, but it was just right to complete my simple little mantel.

 

Kisses and Valentines go together, right?  Well, I absolutely love simple projects and that's why this is my K.I.S.S. (keep it simple, stupid!) mantel.  Quick and simple, just how I like it.  I hope you have a Happy Valentines Day and get some real kisses!